㽶 Ƶ

?
?
Your current location: Home Page > Shandong Hengmei wood industry board selection knowledge, pay close attention to
Shandong Hengmei wood industry board selection knowledge, pay close attention to
Source: this station ?? Release time: January 18, 2018 ?? Font size large in Small Print this page
? 1. Blockboard: it has good moisture-proof effect and cannot be directly painted. The middle of blockboard is a core made of natural wood sticks, with thin veneer on both sides. As the name suggests, it is also called big core board, which is one of the most important materials in decoration. It can be used for furniture, wooden door and door pocket, heating cover, curtain box, etc. its waterproof and moisture-proof performance is better than particleboard and MDF. Due to the unsightly appearance of the wood grain on the surface, it is seldom to paint directly, and the veneer plywood is usually pasted.
2. Glulam: it is not easy to deform. It is a new solid wood material. It is made of high-quality imported large-diameter logs, and is deeply processed and interlaced like fingers. Due to different processes, the environmental performance of this board is superior, which is 1 / 8 of the allowable formaldehyde content of large core board. This kind of board made of solid wood such as American spruce can be directly colored and painted, which saves one process than large core board.
3. Medium density board: the nail holding power of particleboard is worse than that of particleboard. Particleboard is the main material of cupboard at present after being crushed into granules and pressed into board. The medium density board is made of powdered sawdust, which has good flatness but poor moisture resistance. In contrast, the nail holding force of density board is worse than that of particleboard. If the screw is loosened after tightening, it is difficult to fix the density board again because of its low strength, so it is rarely used for cabinet.
4. Splint: easy and cheap multi-layer board, the number of layers is different. According to the thickness of 3-9 cm, it can be called 3-9 cm board. Its advantages and disadvantages mainly depend on raw materials, peach blossom core and poplar wood are cheaper. Now the main use of home decoration is facing plywood, that is, in the factory has been very thin solid wood veneer pasted on the plywood. The veneer plywood is easy to use, and the price is cheaper than buying the decorative panel for the construction team to paste.
5. Melamine double paste board: not afraid of water and fire, this board is bright on both sides, very hard, not afraid of water and fire, mainly used in furniture and cabinets. 6. Veneer: it can produce the same effect as real wood. The veneer is made of high-grade wood with obvious wood grain. The veneer is very thin, the thinnest is only 0.3mm, and the thickness is no more than 2-3mm. The colors of common veneers vary from light to deep, including cherry wood, maple, white beech, red beech, ash, white oak, red oak, teak, pear, walnut, shadow wood, etc Red shadow wood and other dozens of varieties, the price is not cheap. If the veneer is used locally alone to achieve a unique effect, a higher process is required.
Experts remind: do not try to cheap, very low-priced materials are usually shoddy and formaldehyde seriously exceed the standard. It is best to buy in the regular market, where the purchase channel is more guaranteed. Buy branded materials. As wood is the main material in the family decoration, the purchase quantity is large, so we should be cautious when purchasing, and it is better to take experienced people or professional buyers to go. You can also entrust decoration companies to purchase. First, they have suppliers with stable quality, and the price may be lower. Second, once there is a quality problem, the responsibility is clear and the problem is easy to solve.
?
Shandong Hengmei Wood Industry Co., Ltd. all rights 2017 reserved Tel: 13355009700 15863927711 Fax: 0539-5776178 Lu ICP Bei 19047779